Re: Intel RST 12.5 Repeats Verification & Repairing RAID 5
The Intel RST for my Intel desktop board using desktop Seagate Barracuda drives was working without issues until I had a drive failure. The good news and bad news is that the replacement drive I used...
View ArticleRe: HD 4600 on Win7 32bit with more than 4GB RAM hangs
Hello Kevin, thank you for the answer, even if i'm not a driver developer, i would try to tweek the INF file. Windows 7 don't have any problems with more RAM but the driver does. If i purge the driver...
View ArticleNew processor i10
Hello, i've a question have you information about the new peocessor i10 (for mobile, desktop)Many thank'sMoreno
View ArticleComponent Unfit for every Server blade on mfsys25
Hello, all of the sudden the Modular Server Control shows for both blades that are installed "Component unfit". I have reinserted both blades allready and restarted the whole CMM. I even installed the...
View ArticleRe: Corruption in XBMC
nightik wrote: Could you test version of the xbmc posted on the following URL with the lastest drivers?XBMCSetup-20130912-596f548.exe - Google DriveAlso please add (or change if it's exists)...
View ArticleRe: intel HD3000 doesn't send full range RGB 0-255 trought HDMI
Maybe thers an option in xbmc for full range
View ArticleRe: intel HD3000 doesn't send full range RGB 0-255 trought HDMI
And you can eve use quicksync with your cpu, but intel dosn't support it. http://forums.guru3d.com/showthread.php?t=376810
View ArticleClik here to view.
Re: Windows don't boot after HD Graphics Driver installation
Thanks again. Uninstall all the driver, clean the reg by CCleaner. Install ur given link driver, same again!!!! so here some quick question, (im not a technical person )1) now...if i dont install any...
View ArticleRe: Bluescreens and laggy System on Intel DX79SR
Sry - I have been away for quite a while now.Yesterday an today I have been trying to fix the Problem. I did not yet use the procedure sylvia told me.But I still found out some very interessting facts:...
View ArticleRe: MSI MS-3871 WLAN 802.11b/g/n 1T1R+BT2.1 EDR Combo Slim Module Error
Hi tjg79,I have tested a DZ87KLT-75K with this wireless Bluetooth module and I was not able to replicate the issue from my side. I tested the system with MS Office 2007 and 2010 and when sending emails...
View ArticleDZ77RE-75K desktop board compatible with 8GB SDRAM modules?
Is the DZ77RE-75K desktop board compatible with 8GB SDRAM modules in a 2x8GB SDRAM configuration? The manual says only use up to 4GB SDRAM modules. Thanks.
View ArticleRe: how to halt cleanly DH87MC mb desktop from Linux Debian sid
I triple-boot Debian Sid, Windows 7 Pro and Windows 8 Pro using UEFI, and have the exact same issue not only in Debian but also in Windows 7 and in Windows 8. I am running the latest BIOS (v. 0047). I...
View ArticleRe: Does "End of Life" mean that the desktop board is no longer in production...
Hie good people sorry to ask, on the same board (DH55HC) can I use an internal 2x2 tb hard drive or will I have problem?, I am using windows 7 64bit, 8gb ram, 1tb?
View ArticleRe: Component Unfit for every Server blade on mfsys25
Hi, there are 2 modules installed. But what do they have to do with the compute units? One switch is not used at all at the moment.
View ArticleRe: Add chipset driver to Windows Installation
In the Boot section there´s only UEFI|Legacy and the list of priorities.The setup shows "Loading files.." and the F8 menu is possible to enter. With AHCI controller it freeze during logo with circling...
View ArticleRe: intel HD3000 doesn't send full range RGB 0-255 trought HDMI
Something has changed with the new driver. Now:- Madvr has good picture with 0-255 output: blacks and clear. Full/limited driver setting doesn't affect it.- With EVR (default MPC-HC renderer): There is...
View ArticleRe: WiFi Direct with My WiFi Dashboard not working on Windows 8
Status please! Customers needing this feature at least deserve some info on where Intel stands with the issue...
View ArticleRe: Movie Maker 2012
I'm tagging on to this thread in hopes that Robert_U can help me as well. I have been using WLMM that came with my system with no problem. Over the weekend I upgraded to MM 2012 and now get the "Sorry,...
View ArticleRe: DX58SO XMP
Yes try this & lets see what happens PS. your memory speed is running at 1033Mhz which is the default. It's not that you will realize that big difference How much RAM are we talking about?...
View Article